MSP430 SoC with RF Core
True System-on-Chip for Low-Power Wireless Communication Applications

　The Texas Instruments CC430 family of ultra-low-power microcontroller system-on-chip with integrated RF transceiver cores consists of several devices featuring different sets of peripherals targeted for a wide range of applications. The architecture, combined with five low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features the powerful MSP430 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency..

　The CC430 family provides a tight integration between the microcontroller core, its peripherals, software, and the RF transceiver, making these true system-on-chip solutions easy to use as well as improving performance.

The CC430F61xx series are microcontroller system-on-chip configurations combining the excellent performance of the state-of-the-art CC1101 sub-1-GHz RF transceiver with the MSP430 CPUXV2, up to 32 kB of in-system programmable flash memory, up to 4 kB of RAM, two 16-bit timers, a high-performance 12-bit A/D converter with eight external inputs plus internal temperature and battery sensors on CC430F613x devices, comparator, universal serial communication interfaces (USCI), 128-bit AES security accelerator, hardware multiplier, DMA, real-time clock module with alarm capabilities, LCD driver, and up to 44 I/O pins.

The CC430F513x series are microcontroller system-on-chip configurations combining the excellent performance of the state-of-the-art CC1101 sub-1-GHz RF transceiver with the MSP430 CPUXV2, up to 32 kB of in-system programmable flash memory, up to 4 kB of RAM, two 16-bit timers, a high performance 12-bit A/D converter with six external inputs plus internal temperature and battery sensors, comparator, universal serial communication interfaces (USCI), 128-bit AES security accelerator, hardware multiplier, DMA, real-time clock module with alarm capabilities, and up to 30 I/O pins.

Typical applications for these devices include wireless analog and digital sensor systems, heat cost allocators, thermostats, metering (AMR/AMI), smart grid wireless networks, etc..

FEATURES:

● True System-on-Chip (SoC) for Low-Power Wireless Communication Applications

● Wide Supply Voltage Range: 1.8 V to 3.6 V

● Ultra-Low Power Consumption:
　-CPU Active Mode (AM): 160 μA/MHz
　-Standby Mode (LPM3 RTC Mode):2.0 μA
　-Off Mode (LPM4 RAM Retention): 1.0 μA
　-Radio in RX: 15 mA, 250 kbps, 915 MHz

● MSP430™ System and Peripherals
　-16-Bit RISC Architecture, Extended Memory, up to 20-MHz System Clock
　-Wake-Up From Standby Mode in Less Than 6 μs
　-Flexible Power Management System with SVS and Brownout
　-Unified Clock System with FLL
　-16-Bit Timer TA0, Timer_A with Five Capture/Compare Registers
　-16-Bit Timer TA1, Timer_A with Three Capture/Compare Registers
　-Hardware Real-Time Clock
　-Two Universal Serial Communication Interfaces
　-USCI_A0 supporting UART, IrDA, SPI
　-USCI_B0 supporting I2C, SPI
　-12-Bit A/D Converter With Internal Reference, Sample-and-Hold, and Autoscan Features
　 (CC430F613x and CC430F513x Only)
　-Comparator
　-Integrated LCD Driver With Contrast Control for up to 96 Segments (CC430F61xx Only)
　-128-bit AES Security Encryption/Decryption Coprocessor
　-32-Bit Hardware Multiplier
　-Three-Channel Internal DMA
　-Serial Onboard Programming, No External Programming Voltage Needed
　-Embedded Emulation Module (EEM)

● High-Performance Sub-1-GHz RF Transceiver Core
　-Same as in CC1101
　-Wide Supply Voltage Range: 2.0 V to 3.6 V
　-Frequency Bands: 300 MHz to 348 MHz, 389 MHz to 464 MHz, and 779 MHz to 928 MHz
　-Programmable Data Rate From 0.6 kBaud to 500 kBaud
　-High Sensitivity
　 (-117 dBm at 0.6 kBaud, -111 dBm at 1.2 kBaud, 315 MHz, 1% Packet Error Rate)
　-Excellent Receiver Selectivity and Blocking Performance
　-Programmable Output Power Up to +12 dBm for All Supported Frequencies
　-2-FSK, 2-GFSK, and MSK Supported as well as OOK and Flexible ASK Shaping
　-Flexible Support for Packet-Oriented Systems: On-Chip Support for Sync Word
　 Detection, Address Check, Flexible Packet Length, and Automatic CRC Handling
　-Support for Automatic Clear Channel Assessment (CCA) Before Transmitting
　 ( for Listen-Before-Talk Systems)
　-Digital RSSI Output
　-Suited for Systems Targeting Compliance With EN 300 220 (Europe)
　 and FCC CFR Part 15 (US)
　-Suited for Systems Targeting Compliance With Wireless M-Bus Standard
　 EN13757-4:2005
　-Support for Asynchronous and Synchronous Serial Receive/Transmit Mode for
　 Backward Compatibility With Existing Radio Communication Protocols

▲TOP